Tissue

TISSUE Creping Agent
Products : HISOFT - C SERIES

Hisoft is a cationic polyamide adhesive in an aqueous solution. It is one of a series of specialty formulated crepe adhesive used in the manufacturing of tissue and towel products. It is compatible with all crepe releasing agents, to provide the proper balance for effective creping. It has excellent rewet properties, Yankee surface protection, and adhesive. It can increase sheet hand feel properties and blade shelf-life.

TISSUE Softener and Crepe Release Agent
Products : HISOFT - Q & R SERIES

Hisoft have been designed specifically to be added to paper stock by wet end addition for the purpose of softening tissue and absorbent papers or by the surface spray application method to
improve Yankee dryer crepe release properties. It contains a blend of fully refined mineral oil, esters and nonionic surfactants that makes this product easily emulsify in water. It is specifically formulated as an effective crepe release in the Manufacturing of tissue and towel products. It is compatible with all commercial crepe adhesives, to provide the proper balance for effective creping.

Contaminants Control Machine Clothing
Products : FETROL - WP,MC,SC,DC,FC SERIES

Prevention of pitch, stickies, glues, scale and other wet end contaminants on the Wire, Felts, Machine, Pipe or eliminates deposit accumulation resulting in improved sheet quality and extended life. Improved quality and machine runnability.

Microbiological Control
Products : FETROL - BC SERIES

The expected benefits of Biocide are as follows.
- Excellent for removing fungi and algae which form slime
- Prevents the slime from further development with maintaining its property long
- Works well all over the PH range
- Can be effectively used with other chemicals with optimal compatibility

Dry & Wet Strength Resin
Products : POLYFIX - WS,DS SERIES

Dry strength resin increase burst strength and tensile strength by hydrogen bond and ionic bond with cellulose and hemicellulose in pulp. Wet Strength Resin is the Epichlorohydrin modified cationic polyamide resins for better addition use, and have the effect of the improving wet strength.

Deinking Agent
Product : DEINKING - D SERIES

As the Deinking agent of ONP(Magazine + Newsprint + Ground wood free, etc) used, DEINKING chemical to be developed suitable for flotation/washing process system is dispersant /collecting
nonionic surfactant. This surfactant specifically designed to maximize ink removal for printed recycled fiber and office waste deinking system. This product has demonstrate excellent dirt removal capability by effectively conditioning the inks found in white ledger furnishes. The presence of kneading or dispersion enhances its performance.

1. It is a nonionic surfactant of special alcohol delivative that maximized ink aeration in flotation cells
   
2. It is very excellent in absorbing ink into foams by preventing ink particles from re-adhering to foams
   
3. It has very little loss of textile during processes, and minimizes foam troubles during deinking process
   
4. Easy to treat waste water and good bio-degradability

Defoamer
Products : FETROL - DF,CS SERIES

Mixture of aliphatic hydroxy compounds and hydrocarbons in the form of an aqueous emulsion(water soluble & oil types)

Products	Composition	Appearance	Ionic	Solid	Properties & Features
DF-150	Siliconeoil compound	Gray	Nonionic	100%	100% active content, effective in non aqueous system
DF-110	Silicone Emulsion	Milky-white	Weak anionic	16%	Foam control for paper and waste water treatment industrial process
DF-130	Silicone Emulsion	Milky-white	Weak anionic	25%	Foam control for waste water treatment industrial process
DF-220	Silicone Emulsion	Milky-white	Weak anionic	14%	Foam control for paper and waste water treatment industrial process
DF-105	Fatty alcohol & Fatty ester mixture	Milky-white	Weak anionic	18%	Foam control for membrane and high temp. water treatment.
DF-610				30%	Foam control for membrane and high temp. water treatment.
DF-506				30%	Foam control for papermaking. Used cold water system.
DF-612				30%	Foam control for papermaking. Used relatively hot water system.
DF-620				14%	Foam control for papermaking Used hot water system.